Timmy Patterson Synthetic 84 Surfboard

The Synthetic 84 is a tribute to the good old days, when Timmy started his first surfboard label Synthetic surfboards and was working with the legendary Damian Brawner in the 1980’s. Timmy has taken all the positive aspects of boards he built then and has incorporated them into the modern shapes of today. This combo is nothing but pure magic and has been tested by some of the top surfers from around the globe. The consensus of all that have ridden the Synthetic 84’ was nothing but fantastic! As a matter of fact, the “psych meter” went through the roof! As result of such positive feedback, we had to release this one for all of you guys to try for yourself. This board’s niche is just between the Rising Sun and the high performance shortboard. It’s the missing link we are all looking for. The Synthetic 84’ can be ordered up with a bump squash or bump round tail. There is also the custom order option of adding the classic belly four channels that go under your front foot above the fins. The Synthetic 84 has a lower rocker and the bottom runs flat to a slight single into a slight double and fades into vee off the tail. The deck stays flat with a down rail and beak nose. This allows for maximum volume, yet the down rail lets you still sink this higher volume board onto rail in critical sections and off your bottom turns. It has a fuller outline so this board likes to increase your wave count and really comes in handy battling out the every day crowds. You will want to ride this model about 2 inches shorter than your everyday shortboard and comes in a tri fin set up.

Recommended fins for this model are the Julian Wilson Air Core from FCS or the Rake Legacy Template from FUTURES.

About this board:

Construction: PU
Glassing: Standard (4+4 deck, 4 bottom)
Fin Boxes: FCS2/Futures x 3 (Choose option above - Fins not included)
Tail shape: Rounded Square
Dimensions/Litres: See size graph above

About Timmy Paterson Surfboards:

T. Patterson Surfboards was founded in 1980 by surfboard shaper Tim Patterson. The Patterson family has a long history in the surfing industry and Tim is the second generation surfboard builder from the Patterson family. His father, Ronald Patterson, and his uncles, Robert and Raymond Patterson, have been involved in the surf industry since its inception in the 1950’s

Prior to opening T. Patterson Surfboards, Tim shaped at Hobie Surfboards in Dana Point, California. It was there that he learned the art of shaping from legends such as Dale Velzy, Chris McElroy, Mickey Munoz, and Terry Martin. He was involved with all the facets of the manufacturing process including shaping, laminating, glossing, sanding, and airbrushing. Tim is well versed in all phases of surfboard manufacturing and is considered an expert in design, development, and the hand shaping process.

At T. Patterson Surfboards, Tim continues to apply his knowledge and skills to research, design, and create constantly better surfboards. Tim also spends lots of time in the water making sure that his designs give surfers the speed and responsiveness that we all crave.

Shipping & FAQ:

Australia wide postage available or local pick-up, choose at checkout. Boards in stock (see graph above) are ready to be sent & are shipped out on the same day of purchase with tracking provided. Boards are safely packed in a box with layers of bubble wrap. See our shipping & FAQ tab above or visit this link: https://www.sanbah.com/pages/shipping-faq